Refill vs Non-Drop: Which One to Choose
Refill vs non drop is not really a choice between two rival products. The two labels answer different questions. “Non-drop” is the supplier's prediction of how well delivered units will hold. “Refill” is a remedy: while the window printed on the listing is open, the Refill button on your order asks for the lost units to be topped back up. This page compares them on price, on what each one actually does when a count falls, and on which campaigns each one suits.
For the background on each term, read non drop followers explained and the smm refill guarantee guide. This page assumes you know the terms and need to pick a listing.
Definitions Side by Side
Read the two terms as answers to two separate questions about a listing: “how much is this likely to fall?” and “what can I do if it falls?”
| Non-drop | Refill | |
|---|---|---|
| What it is | A description of the source accounts: the supplier expects few of them to disappear | A top-up mechanism tied to the order: units lost during the stated window can be requested again |
| Who sets it | The supplier behind the listing; the panel passes the wording on | The listing itself, which states a refill period (or says no refill) |
| What you can do when the count falls | Nothing is triggered by the label alone | Press Refill on the order, or call the API refill action, while the window is open |
| Where you see it | In the service name or description (non-drop, low drop and similar wording) | In the service name or description, and as the refill flag in the API service list |
| When it stops mattering | Never formally ends, because it was never a promise | When the refill window on the listing closes |
| What it cannot do | Stop a platform from removing accounts it treats as inauthentic | Help if the link was changed, made private or ordered elsewhere at the same time |
Because the two describe different things, panel listings fall into four groups, and the real decision is between these four:
- No refill, no drop claim. The cheapest group. You get the delivery and nothing after it.
- Non-drop, no refill. Better source accounts are expected, but if the count does fall there is no button to press.
- Refill, no drop claim. Drops are expected and the listing budgets for them by offering top-ups inside its window.
- Non-drop plus refill. Usually the top of the list for that metric: lower expected loss and a remedy if loss happens anyway.
Price Comparison
Every listing is priced per 1,000 units, and the order of the four groups above is roughly the order of their rates. A refill listing costs more because the supplier has to keep spare capacity for top-ups. A non-drop listing costs more because stable source accounts are harder to supply. Current rates for each group are on the panel price list. We do not quote them here because they change with supply.
The sticker rate is the wrong number to compare. What matters is the cost of each unit that is still there when you need the count:
Cost per retained unit = total spent ÷ units still on the profile at the date that matters to you
Worked example (made-up round numbers, not panel rates): you need 2,000 followers to still be on a profile at the end of a client campaign.
- Listing A, no refill, at 1.00 per 1,000. You pay 2.00. Suppose 400 units fall away. To get back to 2,000 you buy 400 more, if that is above the listing's minimum quantity, for 0.40, and some of those may also fall. You have spent at least 2.40, placed two orders and watched the count yourself.
- Listing B, refill, at 1.50 per 1,000. You pay 3.00. The same 400 units fall inside the refill window, you press Refill once and the count goes back towards the target. You have spent 3.00 and placed one order.
In this example the cheaper listing still wins on money, and the refill listing wins on time and predictability. The balance flips when the loss is larger, when the count has to hold for a client report, or when you are a reseller and every drop becomes a customer complaint. It also flips the other way: if you only need the number on the day of a launch, paying for a refill window you will never use is wasted margin.
Protection Against Drops
Here is what each option actually does in the situations that cause most support tickets. “Refill” assumes the order is completed and the listing's refill window is still open.
| Situation | Non-drop only | Refill listing |
|---|---|---|
| A slow trickle of lost units | Less likely to happen, but nothing to press if it does | Request a refill once the count is below start count plus ordered quantity |
| A platform clean-up removes many accounts at once | Can still happen; the label does not bind the platform | Refill can restore the count while the window is open; the platform can remove units again |
| The drop happens after the window has closed | Same as any other time | No longer covered |
| You renamed the account or made it private | Delivered units may not show or be countable | Not eligible under the Terms |
| Another order, here or elsewhere, ran on the same link | Drops cannot be traced to one order | Not eligible under the Terms |
| The count fell below where it started | Organic losses are outside any order | Refill only restores up to start count plus ordered quantity |
Two points from the table matter most. First, neither option stops a platform from removing engagement it treats as inauthentic. A platform clean-up is outside the panel's control whatever the listing says. Second, a refill only helps if you keep the conditions intact: same link, account public, no parallel orders. If you cannot promise that, for example because a client also runs their own campaigns on the profile, the refill window is worth less than it looks.
The causes behind each row are covered in why followers drop after delivery, and the eligibility checks and the Refill button itself in how to request a refill.
Which to Choose by Goal
Start from how long the number has to hold and who will notice if it falls. Then pick the cheapest group that covers that.
| Goal | Pick | Why |
|---|---|---|
| A brand or creator profile you will keep | Non-drop plus refill | The count is visible for a long time, so both lower loss and a remedy are worth paying for |
| Agency work with a client report at the end | Refill, ideally also non-drop | You need the number to still be there on report day, and a refill keeps the fix inside one order |
| A launch or event where the number matters on the day | Non-drop without refill, or the cheapest group | A refill window you will not use is margin you could have kept |
| Testing a new listing before scaling | The listing you plan to scale, at its minimum quantity | A small order shows you that listing's real behaviour on your kind of account |
| Reselling to your own customers | Offer both: a cheaper no-refill tier and a refill tier | Customers choose their own trade-off, and refill requests go through the same order ID |
| Views and other one-time counts | Usually no refill needed | Many view listings carry no refill, and a view that has been counted is not something you top up |
Three questions to settle refill vs non drop. Does the count need to hold beyond the day of delivery? Will anything else touch the link during the refill window, such as another order, a rename or a privacy change? Could you afford to re-order the lost part yourself? A yes, no, no points to a refill listing. A no to the first question points to the cheapest listing that delivers the metric.
For resellers using the API: the service list returned by action=services includes a refill flag per service. Show your customers the refill period exactly as the listing states it and do not round it up. Price the refill tier so it covers the work of handling requests, not only the rate difference.
Refill and non-drop are only two of the signals on a listing. Start time, speed and the type of source account matter as well, and smm service quality covers how to weigh them together.
Should I pick refill or non-drop?
For accounts you will keep long term, combine a low-drop service with a refill period.
Official references
Related pages